Environment Climate Test Chamber with Temperature Humidity Oxygen Pressure control

WhatsApp/Wechat

Get Quote

With Temperature Humidity Oxygen Pressure control. Customization is supported! Pls contact for price.Thanks.

Home Page_black garlic fermenter_wxharris ꄲ Customized Non-standard Test Chambers ꄲ Environment Climate Test Chamber with Temperature Humidity Oxygen Pressure control

Temperature and pressure change test chamber
Product model	TBWY-100	TBWY-150	TBWY-250	TBWY-500	TBWY-010
Studio Size (cm)	50x40x50	50x50x60	60x60x70	80x70x90	100x100x100
Temperature range	A: -20°C~150°C B: -40°C~150°C C: -60°C~150°C D: -80°C~150°C
Pressure range	A:≤133Pa B:≤10Pa C:≤1x10-6
Alternating range	The temperature can reach 80°C
Temperature fluctuations	±0.5°C (measured after stabilization)
Temperature uniformity	≤±3°C (measured after stabilization)
Rate of warming	1.0°C~3.0°C/min (average of the whole process)
Cooling rate	0.7°C~1.2°C/min (average of the whole process)
Heating time	RT℃～150℃≤40min
Cooling time	RT℃～-60℃≤60min
Operating noise	≤72 dB（A）
Sample holder load-bearing	≤20kg
Running power	~3.95KW	~4.75KW	~6.35KW	~7.65KW	~9.35KW
material	Liner: # SUS 304 stainless steel		Outer box: cold plate spraying/#SUS304
Wind circulation mode	Centrifugal impeller forced drive
Refrigeration method	Single-stage refrigeration/double-machine stacking
compressor	French "Taikang" / American "Copelant"
Refrigerant	R4O4A DuPont Eco-friendly Refrigerant/R23
Cooling method	Air cooled or water cooled
heater	316L Seamless Stainless Steel Fin Heater/Nichrome Electric Heating Wire Heater/Ceramic Heating Blade
Control instrumentation	TEMI880 or OYO-8256P or HLS950or E300
Relevant standards	GB/T2423.2-93 (equivalent to IEC68-2-3) GB10592-89 high and low temperature test chamber technical conditions GB2423.1—2001 Part 2: Test method Test A: low temperature GB2423.2—2001 Part 2: Test method Test B: High temperature GB10589-89 Low Temperature Test Chamber Technical Conditions GB11158-89 Technical conditions of high-temperature test chamber GJB150.4A-2009 Environmental Test Method for Military Equipment Laboratory Part 4: Low Temperature Test GJB150.3A-2009 Environmental Test Method for Military Equipment Laboratory Part 3: High Temperature Test
Standard accessories	1 Observation window (multi-layer hollow thermal conductivity and anti-fog type) 1 50mm test hole 1 U-shaped energy-saving lamp 1 Sample Holder 3 Resettable fuse 1 Power supply cable 3 meters.
Safety device	Compressor overload protection Phase sequence/missing phase protection Mechanical over-temperature protection Electronic over-temperature protection Overcurrent protection device Fully protected power switch